Description:
The TSU 100e is the modular, full-featured T1/FT1 multiplexer designed to support a wide range of end-user applications. Equipped with both a synchronous V.35 DTE interface, the TSU 100e supports applications combining high-speed data with additional end user applications. As interface requirements increase, the flexibility of the TSU 100e benefits the user with modularity through its expansion slot. The TSU 100e provides complete monitoring and control of the T1 network with embedded simple network management protocol (SNMP) provided through a SLIP interface. To support critical data applications, the built-in V.35 interface on the TSU 100e can be converted to provide dial backup functionality during T1 failure conditions. This feature is supported by the interface and is available using an optional V.35 "Y" cable. The TSU 100e also has a built-in 10BaseT Ethernet interface.
Manufactured by: ADTRAN
Model/Part : 1202052L1
Product Type: Multiplexor
Form Factor: External
Built-in Devices: Status LCD, keypad
Installed Modules Qty (Max): 0 ( 1 )
Connectivity Technology: Wired
Line Rate: T-1
Data Transfer Rate: 10 Mbps
Line Coding Format: AMI, B8ZS
Framing Format: ANSI T1.403, AT&T 54016, D4, ESF
Data Link Protocol: Ethernet, serial
Remote Management Protocol: SNMP
Compliant Standards: IEEE 802.3
Expansion Slots Total (Free): 1 ( 1 ) x expansion slot
Interfaces: 1 x management - RS-232 - RJ-45 - 2 1 x network - T1-FT1 - RJ-48C - 1 1 x serial - V.35 - 34 pin M/34 (V.35) - 1 1 x network - Ethernet 10Base-T - RJ-45 - 1
Power Device: Power supply - integrated
Voltage Required: AC 115 V
Frequency Required: 60 Hz
Power Consumption Operational: 9 Watt
Enclosure Color: White
Width: 8.5 in
Depth: 12.5 in
Height: 3.1 in
Weight: 4.0 lbs
CABLES
NETWORKING
• 3COM NETWORKING
