Description
NETGEAR’s high-performance, stackable, Layer 3 Fast Ethernet switch with Power over Ethernet (PoE), delivers maximum throughput and flexible deployment where you need it – to high-density user communities with VoIP, access points or IP-based surveillance camera requirements. With IEEE 802.3af PoE on all 48 ports, the ProSafe FSM7352PS features 48 10/100 Mbps ports and four 10/100/1000 ports which enable fiber connectivity through four hot-swappable Small Form-factor Pluggable (SFP) gigabit interfaces. The non-blocking design of the switch delivers simultaneous, full wire-speed, low-latency throughput to all ports. In addition, its 1U rack-mount form factor uses less rack space and provides lower per-port cost than comparable PoE switches.
Manufactured by: NETGEAR
Model/Part : FSM7352PS
Product Type: Switch – stackable
Enclosure Type: Rack-mountable – 1U
Localization: English / North America
Memory RAM: 256 MB
Flash Memory: 16 MB
Networking Ports Qty: 48 x Ethernet 10Base-T, Ethernet 100Base-TX
Auxiliary Network Ports: 4×10/100/1000Base-T/SFP (mini-GBIC)
Data Transfer Rate: 100 Mbps
Data Link Protocol: Ethernet, Fast Ethernet
Routing Protocol: RIP-1, RIP-2, IGMPv2, IGMP, VRRP, OSPFv2
Remote Management Protocol: SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTPS
Connectivity Technology: Wired
Communication Mode: Half-duplex, full-duplex
Switching Protocol: Ethernet
MAC Address Table Size: 16K entries
Status Indicators: Port status, link activity, port transmission speed, power, status
Features: Layer 3 switching, layer 2 switching, auto-sensing per device, DHCP support, VLAN support, auto-uplink (auto MDI/MDI-X), Syslog support, store and forward, Broadcast Storm Control, SNTP support
Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s
Expansion Slots Total (Free): 4 ( 4 ) x SFP (mini-GBIC)
Interfaces: 48 x network / power – Ethernet 10Base-T/100Base-TX – RJ-45 1 x management – RS-232 4 x network – Ethernet 1000Base-T – RJ-45
Encryption Algorithm: TLS 1.0, SSL 3.0
Authentication Method: Secure Shell (SSH), RADIUS, Secure Shell v.2 (SSH2)
Compliant Standards: CE, FCC Class A certified, C-Tick, CISPR 22 Class A, EN 60950, IEC950, UL 1950, VCCI Class A ITE, CSA 22.2 No. 950, EN55022 Class A, FCC Part 15
Power Over Ethernet (PoE): Yes
Power Device: Power supply – internal
Voltage Required: AC 120/230 V ( 50/60 Hz )
Power Consumption Operational: 440 Watt
Width: 17.3 in
Depth: 15.2 in
Height: 1.7 in
Weight: 12.6 lbs
Reviews
There are no reviews yet.